Stress in ASME Pressure Vessels, Boilers, and Nuclear Components

An illustrative guide to the analysis needed to achieve a safe design in ASME Pressure Vessels, Boilers, and Nuclear Components

Stress in ASME Pressure Vessels, Boilers, and Nuclear Components offers a revised and updatededition of the text, Design of Plate and Shell Structures. This important resource offers engineers and students a text that covers the complexities involved in stress loads and design of plates and shell components in compliance with pressure vessel, boiler, and nuclear standards. The author covers the basic theories and includes a wealth of illustrative examples for the design of components that address the internal and external loads as well as other loads such as wind and dead loads.

The text keeps the various derivations relatively simple and the resulting equations are revised to a level so that they can be applied directly to real-world design problems. The many examples clearly show the level of analysis needed to achieve a safe design based on a given required degree of accuracy. Written to be both authoritative and accessible, this important updated book:

• Offers an increased focus on mechanical engineering and contains more specific and practical code-related guidelines

• Includes problems and solutions for course and professional training use

• Examines the basic aspects of relevant theories and gives examples for the design of components

• Contains various derivations that are kept relatively simple so that they can be applied directly to design problems

Written for professional mechanical engineers and students, this text offers a resource to the theories and applications that are needed to achieve an understanding of stress loads and design of plates and shell components in compliance with pressure vessel, boiler, and nuclear standards.

Autorentext

Maan H. Jawad, PhD, PE, ASME Life Fellow, is active on several technical committees of the American Society of Mechanical Engineers related to boilers and pressure vessels since 1972. He is President of his own engineering consulting firm and was formerly Director of Engineering of Nooter Corporation. He is the author of Guide to the Design of ASME Section VIII Pressure Vessels, now in its fourth edition.

Zusammenfassung
An illustrative guide to the analysis needed to achieve a safe design in ASME Pressure Vessels, Boilers, and Nuclear Components

Stress in ASME Pressure Vessels, Boilers, and Nuclear Components offers a revised and updatededition of the text, Design of Plate and Shell Structures. This important resource offers engineers and students a text that covers the complexities involved in stress loads and design of plates and shell components in compliance with pressure vessel, boiler, and nuclear standards. The author covers the basic theories and includes a wealth of illustrative examples for the design of components that address the internal and external loads as well as other loads such as wind and dead loads.

The text keeps the various derivations relatively simple and the resulting equations are revised to a level so that they can be applied directly to real-world design problems. The many examples clearly show the level of analysis needed to achieve a safe design based on a given required degree of accuracy. Written to be both authoritative and accessible, this important updated book:

• Offers an increased focus on mechanical engineering and contains more specific and practical code-related guidelines
• Includes problems and solutions for course and professional training use
• Examines the basic aspects of relevant theories and gives examples for the design of components
• Contains various derivations that are kept relatively simple so that they can be applied directly to design problems
  Written for professional mechanical engineers and students, this text offers a resource to the theories and applications that are needed to achieve an understanding of stress loads and design of plates and shell components in compliance with pressure vessel, boiler, and nuclear standards.

Inhalt

Series Preface ix

Acknowledgment xi

1 Membrane Theory of Shells of Revolution 1

1.1 Introduction 1

1.2 Basic Equations of Equilibrium 1

1.3 Spherical and Ellipsoidal Shells Subjected to Axisymmetric Loads 6

1.4 Conical Shells 18

1.5 Cylindrical Shells 20

1.6 Cylindrical Shells with Elliptical Cross Section 22

1.7 Design of Shells of Revolution 23

Problems 23

2 Various Applications of the Membrane Theory 27

2.1 Analysis of Multicomponent Structures 27

2.2 PressureArea Method of Analysis 35

2.3 Deflection Due to Axisymmetric Loads 42

Problems 47

3 Analysis of Cylindrical Shells 51

3.1 Elastic Analysis of Thick-Wall Cylinders 51

3.2 Thick Cylinders with Off-center Bore 56

3.3 Stress Categories and Equivalent Stress Limits for Design and

Operating Conditions 57

3.4 Plastic Analysis of Thick Wall Cylinders 63

3.5 Creep Analysis of Thick-Wall Cylinders 65

3.6 Shell Equations in the ASME Code 69

3.7 Bending of Thin-Wall Cylinders Due to Axisymmetric Loads 71

3.8 Thermal Stress 89

3.9 Discontinuity Stresses 98

Problems 100

4 Buckling of Cylindrical Shells 103

4.1 Introduction 103

4.2 Basic Equations 103

4.3 Lateral Pressure 108

4.4 Lateral and End Pressure 114

4.5 Axial Compression 117

4.6 Design Equations 120

Problems 136

5 Stress in Shells of Revolution Due to Axisymmetric Loads 141

5.1 Elastic Stress in Thick-Wall Spherical Sections Due to Pressure 141

5.2 Spherical Shells in the ASME Code 142

5.3 Stress in Ellipsoidal Shells Due to Pressure Using Elastic Analysis 145

5.4 Ellipsoidal (Dished) Heads in the ASME Code 146

5.5 Stress in Thick-Wall Spherical Sections Due to Pressure Using Plastic Analysis 150

5.6 Stress in Thick-Wall Spherical Sections Due to Pressure Using Creep Analysis 150

5.7 Bending of Shells of Revolution Due to Axisymmetric Loads 151

5.8 Spherical Shells 156

5.9 Conical Shells 165

Problems 174

6 Buckling of Shells of Revolution 175

6.1 Elastic Buckling of Spherical Shells 175

6.2 ASME Procedure for External Pressure 179

6.3 Buckling of Stiffened Spherical Shells 180

6.4 Ellipsoidal Shells 181

6.5 Buckling of Conical Shells 181

6.6 Various Shapes 184

Problems 184

7 Bending of Rectangular Plates 187

7.1 Introduction 187

7.2 StrainDeflection Equations 189

7.3 StressDeflection Expressions 194

7.4 ForceStress Expressions 196

7.5 Governing Differential Equations 197

7.6 Boundary Conditions 200

7.7 Double Series Solution of Simply Supported Plates 204

7.8 Single Series Solution of Simply Supported Plates 206

7.9 Rectangular Plates with Fixed Edges 211

7.10 Plate Equations in the ASME Code 212

Problems 213

8 Bending of Circular Plates 215

8.1 Plates Subjected to Uniform Loads in the -Direction 215

8.2 Circular Plates in the ASME Code 225

8.3 Plates on an Elastic Foundation 227

8.4 Plates with Variable Boundary Conditions 231

8.5 Design of Circular Plates 234

Problems 235

9 Approximate Analysis of Plates 239

9.1 Introduction 239

9.2 Yield Line Theory 239

9.3 Further Application of the Yield Line Theory 247

9.4 Design Concepts 253

Problems 255

10 Buckling of Plates 259

10.1 Circular Plates 259

10.2 Rectangular Plates 263

10.3 Rectangular Plates with Various Boundary Conditions 271 10.4 Finite Difference Equations for Buckling 275</p...