Smart Sensor Systems

With contributions from an internationally-renowned group of experts, this book uses a multidisciplinary approach to review recent developments in the field of smart sensor systems, covering important system and design aspects. It examines topics over the whole range of sensor technology from the theory and constraints of basic elements, physics and electronics, up to the level of application-orientated issues.

Developed as a complementary volume to 'Smart Sensor Systems' (Wiley 2008), which introduces the basics of smart sensor systems, this volume focuses on emerging sensing technologies and applications, including:

• State-of-the-art techniques for designing smart sensors and smart sensor systems, including measurement techniques at system level, such as dynamic error correction, calibration, self-calibration and trimming.
• Circuit design for sensor systems, such as the design of precision instrumentation amplifiers.
• Impedance sensors, and the associated measurement techniques and electronics, that measure electrical characteristics to derive physical and biomedical parameters, such as blood viscosity or growth of micro-organisms.
• Complete sensor systems-on-a-chip, such as CMOS optical imagers and microarrays for DNA detection, and the associated circuit and micro-fabrication techniques.
• Vibratory gyroscopes and the associated electronics, employing mechanical and electrical signal amplification to enable low-power angular-rate sensing.
• Implantable smart sensors for neural interfacing in bio-medical applications.
• Smart combinations of energy harvesters and energy-storage devices for autonomous wireless sensors.

Smart Sensor Systems: Emerging Technologies and Applications will greatly benefit final-year undergraduate and postgraduate students in the areas of electrical, mechanical and chemical engineering, and physics. Professional engineers and researchers in the microelectronics industry, including microsystem developers, will also find this a thorough and useful volume.

Auteur

Professor Gerard C. M. Meijer, Electronic Instrumentation Laboratory, Delft University of Technology, the Netherlands
Professor Meijer is currently a full professor of the Laboratory of Electronic Instrumentation at Delft University of Technology and since 1972 he has been a member of the Research and Teaching staff of the Faculty of Electrical Engineering. His main areas of research concern smart sensor systems and analog interface electronics. He has performed application-oriented research on sensor-interface circuits and fundamental research on the accuracy of voltage references, integrated temperature sensors, effects of mechanical stress in integrated circuits and the effects at high temperatures in integrated circuits.
Professor Meijer chairs the national organization 'Sensorplatform' of the Dutch Technology Foundation STW, and the program 'Autonomous Sensor Systems' a national research program. His work has been published in over 280 papers and he has won numerous awards including 'Simon-Stevin Meester' honouree degree in 1999, and the 'Anthony van Leeuwenhoek' chair at TUdelft in 2001.

Contributors:
Bernhard Boser, University of California, Berkeley
Jan Bosiers, Dalsa, the Netherlands
Tim Denison, Medtronic, USA
Johan Huijsing, TUDelft, the Netherlands
Kofi Makinwa, TUDelft, the Netherlands
Michiel Pertijs, Holst Centre, the Netherlands
Roland Thewes, Infineon, Germany
Tim Tiek, Sensata, the Netherlands
Albert Theuwissen, TUDelft, the Netherlands

Contenu

About the Editors xi

List of Contributors xiii

Preface xv

1 Smart Sensor Design 1
Kofi Makinwa

1.1 Introduction 1

1.2 Smart Sensors 2

1.2.1 Interface Electronics 3

1.2.2 Calibration and Trimming 5

1.3 A Smart Temperature Sensor 5

1.3.1 Operating Principle 6

1.3.2 Interface Electronics 6

1.3.3 Recent Work 8

1.4 A Smart Wind Sensor 8

1.4.1 Operating Principle 8

1.4.2 Interface Electronics 10

1.4.3 Recent Work 11

1.5 A Smart Hall Sensor 11

1.5.1 Operating Principle 11

1.5.2 Interface Electronics 12

1.5.3 Recent Work 13

1.6 Conclusions 14

References 14

2 Calibration and Self-Calibration of Smart Sensors 17
Michiel Pertijs

2.1 Introduction 17

2.2 Calibration of Smart Sensors 18

2.2.1 Calibration Terminology 18

2.2.2 Limited Validity of a Calibration 19

2.2.3 Specifics of Smart Sensor Calibration 20

2.2.4 Storing Calibration Data in the Sensor 20

2.2.5 Calibration in the Production Process 23

2.2.6 Opportunities for Smart Sensor Calibration 24

2.2.7 Case Study: A Smart Temperature Sensor 24

2.3 Self-Calibration 27

2.3.1 Limitations of Self-Calibration 27

2.3.2 Self-Calibration by Combining Multiple Sensors 27

2.3.3 Self-Calibrating Sensactors 30

2.3.4 Case Study: A Smart Magnetic Field Sensor 31

2.3.5 Null-Balancing Sensactors 33

2.3.6 Case Study: A Smart Wind Sensor 35

2.3.7 Other Self-Calibration Approaches 36

2.4 Summary and Future Trends 38

2.4.1 Summary 38

2.4.2 Future Trends 39

References 40

3 Precision Instrumentation Amplifiers 42
Johan Huijsing

3.1 Introduction 42

3.2 Applications of Instrumentation Amplifiers 43

3.3 Three-OpAmp Instrumentation Amplifiers 44

3.4 Current-Feedback Instrumentation Amplifiers 46

3.5 Auto-Zero OpAmps and InstAmps 48

3.6 Chopper OpAmps and InstAmps 52

3.7 Chopper-Stabilized OpAmps and InstAmps 56

3.8 Chopper-Stabilized and AZ Chopper OpAmps and InstAmps 62

3.9 Summary and Future Directions 65

References 66

4 Dedicated Impedance-Sensor Systems 68
Gerard Meijer, Xiujun Li, Blagoy Iliev, Gheorghe Pop, Zu-Yao Chang, Stoyan Nihtianov, Zhichao Tan, Ali Heidari and Michiel Pertijs

4.1 Introduction 68

4.2 Capacitive-Sensor Interfaces Employing Square-Wave Excitation Signals 71

4.2.1 Measurement of Single Elements 71

4.2.2 Energy-Efficient Interfaces Based on Period Modulation 71

4.2.3 Measurement of Capacitive Sensors with High Speed and High Resolution 74

4.2.4 Measurement of Grounded Capacitors: Feed-Forward Active Guarding 76

4.3 Dedicated Measurement Systems: Detection of Micro-Organisms 78

4.3.1 Characterization of Conductance Changes Due to Metabolism 78

4.3.2 Impedance Measurements with a Relaxation Oscillator 81

4.4 Dedicated Measurement Systems: Water-Content Measurements 83

4.4.1 Background 83

4.4.2 Capacitance Versus Water Content 83

4.4.3 Skin and Proximity Effects 85

4.4.4 Dedicated Interface System for Water-Content Measurements 87

4.5 Dedicated Measurement Systems: A Characterization System for Blood Impedance 89

4.5.1 Characteristics of Blood and Electrical Models 89

4.5.2 In-vivo Blood Analysis System 92

4.5.3 Experimental Results 95

4.6 Conclusions 97

References 98

5 Low-Power Vibratory Gyroscope Readout 101
Chinwuba Ezekwe and Bernhard Boser

5.1 Introduction 101

5.2 Power-Efficient Coriolis Sensing 101

5.2.1 Review of Vibratory Gyroscopes 102

5.2.2 Electronic Interface 102

5.2.3 Readout Interface 103

5.2.4 Improving Readout Interface Power Efficiency 105

5.2.5 Exploiting the Sense Resonance 106

5.3 Mode Matching 108

5.3.1 Estimating the Mismatch 109

5.3.2 Tuning Out the Mismatch 112

5.3.3 Closing the Tuning Loop 114

5.3.4 Practical Considerations 116

5.4 Force Feedback 119

5.4.1 Mode-Matching Consideration 119

5.4.2 Preliminary System Architecture and Model for Stability Analysis 120

5.4.3 Accommodating Parasitic Resonances 121

5.4.4 Positive Feedback Architecture 126

5.5 Experimental Prototype 133

5.5.1 Implementation 133

5.5.2 Experimental Results 138

5.6 Summary 142

References 143

6 Introduction to CMOS-Based DNA Microarrays 145
Roland Thewes

6.1 Introduc…